What type of microphone is best for recording clarinet?
Recording a clarinet in the studio, you are best off with a large diaphragm condenser mic or a ribbon mic. Condenser mics are the standard vocal recording mics, and are also frequently used on all manner of acoustic instruments and percussion. They are known to highlight the high frequency air of instruments.
Nevertheless, how do you use a microphone on a clarinet?
Instead, you need to place a mic where it can 'see' the entire body of the clarinet. Try placing the small-diaphragm condenser mic about a foot away and aiming more or less at the lower hand position.
Moreover, where should you place a microphone for a clarinet?
The microphone should be placed above the tone holes on the clarinet in the middle of the body, that way it will pick up the most direct sound as well as partials and overtones that sound.
Nonetheless, how do you use a condenser mic on a clarinet?
To spot-mic a clarinet is to focus in and isolate its sound as much as possible. Position a directional microphone between half a foot to three feet away from the clarinet and point the mic at the keys in the centre of the instrument (not at the bell). Experiment with the distance and positioning to get the best sound.
Still, how do you mic a instrument?
To use this technique figure out how wide or tall the instrument is and place a cardioid microphone that same distance away. For example, if you are recording a hammer dulcimer that is 3" wide, the mic should be placed 3" away from it. Most if the time this technique will yield a perfectly usable sound.
Likewise, when would you use a ribbon microphone?
Use the ribbon mic in front of blaring loud guitar amps, to capture drum overheads and even in front of kick drums as long as no air is directly hitting the ribbon.
Then, how do you record a woodwind instrument?
When recording the flute, an overhead approach with a cardioid mic 6-12" (pop) and 3-8' (classical) away, aimed on-axis midway between the mouthpiece and the center of the instrument should yield a nice blend of breathy character and body tone. Again, listen for distracting mechanical and exaggerated breath noises.
Thus, where is the best place to mic a flute?
HOW TO MIC A FLUTE OR RECORDER
- Approx. 5-10 cm away from the instrument, aim the mic halfway between the mouthpiece and the left hand.
- Due to its polar character, the flute can also be spot-miked behind and slightly above the head of the player, pointing at the finger holes.
With so many Microphones For Clarinets available, it's difficult to know which one is best. Fortunately, our research team compiled an unbiased list of 26 best Microphones For Clarinets that will fit every budget. During this study there were over 28771 products across 26 brands. Our verdict: most customers choose Microphones For Clarinets with an average price tag of $677!