How do I choose a Fretwire?
Narrow fretwire is very appropriate for short-scale instruments like mandolins, where the upper frets are close together, but it was also common on vintage Fender style instruments. However, narrow high frets can feel quite 'bumpy', so a wider high fret can be more comfortable to play.
Likewise, how do you know what size fret wire to use?
Choosing fretwire size is a very personal choice and there is really no one size fits all solution. If you love vintage Fender guitars, you might feel at home with a vintage-style radius and a small fretwire size (and possibly stainless steel, so you don't have to re-fret your vintage instrument down the line).
Eventually, how does fret size affect playability?
Big frets = bigger tone, smaller frets equal more precise intonation. Ah, if it were just that easy; if there were only TWO fret sizes big ones for those who want maximum tone, especially on single-string big bend solos, and small ones for those who want precise intonation.
Then, how much space should be between strings and frets?
The distance between the strings and the neck at the 12th fret should be about 1.6 millimetres (0.063 in), or the width of a dime. Hold the flat end of a ruler against the neck and measure how high the strings are. If the strings are further than 1.6 millimetres (0.063 in), (high action) you need to lower the bridge.
Thus, what fret size is best?
Short frets like the 6230, 6150, and 6130 are good for people who really like to feel to fingerboard when they play chords. Whereas, jumbo or medium-jumbo frets feel smoother, provide extra sustain, and can let you bend without exerting as much force.
Nevertheless, when should I Refret my guitar?
Refret. If the fret wear is so deep that a fret level would leave frets that are then too low for comfortable and clean playing, a refret is probably called for.
Beside this, what is a Fretwire?
Fret wire studs are protrusions that stick out of the fret tang to hold the fret wire in the fret slot. Every guitar has slightly different sized fret wire. Like most specifications on guitars, the size of fret wire is chosen for its playability.
And, what size frets did SRV use?
|Neck Material:||Rift Sawn Maple|
|Fingerboard Radius:||12" (305 mm)|
|Number of Frets:||21|
Similarly, does fret wire size matter?
Which size you like is purely a matter of preference, although it can affect your playing style. If you like your fingers to actually touch the fingerboard when fretting the strings, frets that aren't very tall like the 6130, 6150 or 6230 are for you.
In addition, are wide neck guitars easier to play?
Are Wide Neck Guitars Easier to Play? Wide neck guitars are easier to play if you have bigger hands and longer fingers. If you have smaller hands, you'll want to stick with a standard size because it will be more difficult to form chord shapes on a slightly larger neck.
Thereof, are taller frets easier to play?
Ease of bending is also enhanced by taller frets, whether wide or narrow. Narrow frets shouldn't be too hard to bend on, unless they are badly worn down, and they also leave a little more finger room on the fretboard particularly in the higher positions which might suit some players better.
Also, are my frets too high?
Each fret on a guitar needs to be the same height or shorter than the other fret.If the fret rocker can rock back and forth at any time, like a teeter-totter, the fret in the middle of the rocker is too high.