How do I choose a head joint?
A good headjoint should be capable of producing a good dynamic range. It should play very loudly in all three registers with a good quality of sound. It should also play quietly in all three registers whilst being controllable regarding pitch.
Then, what is the head joint on a flute?
The head joint is where the sound of the flute originates as the player blows air into the flute through the embouchure hole (also known as the blow hole or mouth hole). The embouchure hole is in the center of the lip plate (or embouchure plate) that anchors the lips to the flute.
Thus, what is a gold riser on a flute?
When a flutist blows into the headjoint, the air makes contact with the riser and causes the flute to vibrate and produce sound.For example, risers made out of 14 or 18 karat gold can add warmth and depth to the sound, as well as adding resistance.
However, what is the hole in a flute called?
It is a tapered tube of around 22cm in length, with a 'lip-plate' and 'riser' soldered onto it, and a 'head-cork' assembly that seals the tapered end of the tube. The hole that the player blows into is called the 'embouchure hole'.
And, how long is a flute Headjoint?
You need to measure the length (LtoR) which should be about 12mm, Width (Rear to Front) which should be less than 10.5mm and then the diagonal which will vary from about 11.5 to 13mm. This is the approx size for most flutes.
Still, what does a flute Headjoint do?
Investigate Flute Embouchure Hole Size and Shape
A small hole has a sweet sound. An oval shape tends to be fluid and perform well in the upper octaves.The job of a flute headjoint maker is to bring out these qualities to their fullest while maintaining balance, color, and flexibility.
Moreover, what are the 3 joints of the flute called?
The flute has three main parts: the head joint, the body and the foot joint.
Next, how many valves does a flute have?
The flute used in an orchestra is usually made of silver metal, and with at least 13 tone holes controlled by valves.
Beside this, how many buttons does a flute have?
Traditionally, flutes had six or eight tone holes which allowed the flute to play in a single major key. The modern concert flute has 16 tone holes, or 17 if you count the low-B extension on high-quality concert flutes. Having this many keys allows the flutist to play in every key and generally play in tune.
With so many Flute Head Joints available, it's difficult to know which one is best. Fortunately, our research team compiled an unbiased list of 13 best Flute Head Joints that will fit every budget. During this study there were over 61843 products across 13 brands. Our verdict: most customers choose Flute Head Joints with an average price tag of $564!